1 / 5
| No. | Equipment Name | Function Description |
|---|---|---|
| 1 | Stainless steel cylinder mold | Extract the pulp fiber to felt |
| 2 | Alloy dyer cylinder | Dry the wet paper |
| 3 | Exhaust hood of dryer cylinder | To cover the dryer and collect the hot & moist air |
| 4 | Φ600 Axial-flow ventilator | To ventilate and pull out the hot & moist air in the exhaust hood |
| 5 | Roots vacuum pump | To provide the vacuum force for the suction box |
| 6 | Vacuum suction box | To absorb the water in the wet paper |
| 7 | Air compressor | To provide the compressed air for the pneumatic device |
| 8 | Frequency conversion controlling cabinet | To control the running speed of the machine |
| 9 | 3m3 High concentration hydra-pulper | Break the recycle paper into pulp |
| 10 | 1.8m2 High frequency vibrating screen | To separate and remove the small impurity in the pulp |
| 11 | Φ700mm impeller | To stir the pulp and make sure the pulp and water mixed well |
| 12 | 0.5m2 pressure screen (Slotted screen) | To make the pulp more finer |
| 13 | 35m3 Bleacher (include drive part) | To whiten the pulp through bleaching |
| 14 | Φ330mm pulp refiner | To make the pulp much finer and smoothe |
| 15 | Low concentration sand remover | To remove the sand and impurity in the water and pulp |
| 16 | Pulp pump | To provide the pulp for the needed machine |
| 17 | Electrical operation cabinet | To control the machines run or stop |
| 18 | 1T Boiler (burning coal) | To provide the hot steam for the dryers |