[email protected] Factory-Direct Export to 4 Continents

Crescent Type Toilet Paper Making Machine, High Speed Tissue Production Line,for Jumbo Roll Tissue Paper Manufacturing.

Product Description

Products Description
JLW2850/1000 PAPER MACHINE

JLW2850/1000 PAPER MACHINE

This machine is suitable for making wrinkled toilet paper and napkin paper with a ration of 13-30g/m2. Clean paper width is 2850 mm, driving speed is 1100 m/min. Detailed description is as follows:

The frame of this machine is all welded with steel plate box type, which is stable in whole, good in steel and beautiful in appearance. The tension and correction of forming net, blanket and dry net are in the form of electric or pneumatic, and the pressurization structure is in the form of pneumatic pressure. Driving cylinder adopts inserting gear box, drying cylinder adopts thin oil lubrication, and operating side belt expansion bearing seat. Rolling bearings are used in all rolls, which improves the service life of paper machine, reduces energy consumption and reduces equipment maintenance.

The dynamic balance grade of all rolls is G2.5, and the frame is designed and manufactured at 1200 m/min speed.

All welding and casting parts of the machine are treated with internal stress relief, sand blasting, pickling, rust removal and paint corrosion protection.

Low energy consumption High efficiency
Machine introduction
Machine Introduction Image 1
Machine Introduction Image 2
Production Flow
Production Flow Image 1
Production Flow Image 2
Main Technical Parameters
(Taking a width of 2850mm and an operating speed of 1000m/min as an example)
Item Unit Description
Tissue PaperHigh quality toilet paper, facial tissue paper, etc
Roll Weightg/m210 - 35
Crepe Ratio%10 - 30
Roll Up Section Paper Width Measurementmm2850
Working Speedm/min1000
Design Speedm/min1100
Dynamic Balance Vehicle Speedm/min1200
Paper Roller Dynamic Balance Speedm/min1300
Capacityt/dCalculated based on a fixed weight of 16 g/m2, wrinkling rate of 22%, vehicle speed of 900mpm, and 94% efficiency
Paper Machine Gaugemm3800; Wire section 4000 Press and dryer section
PowerkW~449 (Tissue machine)
Drive TypeAll digital AC variable frequency sectional drive
Paper Machine Arrangement Methodhand (looking from reel to headbox, drive side on right side), subject to machine drawing
Maximum Piece Weightt~45t Steel Yankee dryer
Maximum Piece SizemmΦ3660x5480
Wire Outlet Dryness%≥18~20
Drying Degree Before Entering the Dryer%≥36
Drying Degree After Leaving the Dryer%≥94
Paper Dryness%94%
Average Shrinkage Rate%< 2
Return%~8
Main Machine Configuration
Item Description
ModelJLW
YANKEE DRYERΦ3660mm Steel Yankee Dryer
PRESSSuction Press
HOODSteam-heated dual respiration hot-air hood
Capacity Specifications
Item Grade 1 Grade 2 Grade 3 Grade 4 UNIT
Quantitative Winding Unit13.514.51620g/m2
Crepe Ratio20202225%
Roll Up Moisture5555%
Quantification of Drying Cylinder10.811.612.4815g/m2
Clean Paper Width2850285028502850mm
Yankee Cylinder Speed1000950900800mpm
Daily Production44.245.24649.2T/24H
Product Details
Product Details Main Overview
Component Image 1
1. Reciprocating Scraper: Ensures uniform creping of the paper and delivers a smoother surface finish.
2. Headbox: Main support structure is SS304 stainless steel welded and tempered with a rigid frame structure. Multi-tube bundle box design prevents nozzle deformation under high pressure.
3. Paper Winding Machine: Uniformly rolls paper into large-diameter jumbo rolls.
4. Vacuum Roll: Efficiently dewaters the paper web, maintains sheet uniformity and surface quality, reduces roller marks, prevents fiber rewetting, and supports web transfer.
5. Steel Yankee Dryer: Efficiently dries the paper web, controls surface finishing and creping, and supports/transfers the web.
6. Turbo Blower: Provides vacuum to vacuum rolls and vacuum boxes.
7. Low-Pulse Pulp Pump: Delivers pulp to the forming wire (stock approach system).
8. Wire-Pre Pressure Screen: Precise screening of pulp prior to web forming.
9. Hardened Gear Reducer: Transmits motor power through speed reduction.
Detail Component 1
Detail Component 2
Detail Component 3
Company Strength
Company Strength Image 1
Company Strength Image 2
Company Strength Image 3
FAQ & Service
How to pack the products?
We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
What is your payment terms?
T/T and L/C are acceptable and T/T will be more appreciated. 30% deposit in advance and balance before loading.
What is the delivery time?
It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
How to keep your equipment from corrosion?
We use world-famous paint and paint strictly according to the standard process to ensure long-lasting protection.
How do you manufacture your equipment?
Our machining technology includes laser/plasma cutting, automatic welding, CNC cutting, and bending.
How to install after the equipment arrives at the destination?
We will provide detailed illustrations to you. If necessary, we will send technicians to assist with the installation.

Related Products