[email protected] Factory-Direct Export to 4 Continents

Fully Automatic Toilet Paper Tissue Production Line Waste Paper Recycling Pulp Tissue Machine for Household Tissue

Product Description

Products Description
JLW2850/1000 PAPER MACHINE
JLW2850/1000 Paper Machine
This machine is suitable for making wrinkled toilet paper and napkin paper with a ration of 13-30g/m2. Clean paper width is 2850 mm, driving speed is 1100 m/min. Detailed description is as follows:
The frame of this machine is all welded with steel plate box type, which is stable in whole, good in steel and beautiful in appearance. The tension and correction of forming net, blanket and dry net are in the form of electric or pneumatic, and the pressurization structure is in the form of pneumatic pressure. Driving cylinder adopts inserting gear box, drying cylinder adopts thin oil lubrication, and operating side belt expansion bearing seat. Rolling bearings are used in all rolls, which improves the service life of paper machine, reduces energy consumption and reduces equipment maintenance.
The dynamic balance grade of all rolls is G2.5, and the frame is designed and manufactured at 1200 m/min speed.
All welding and casting parts of the machine are treated with internal stress relief, sand blasting, pickling, rust removal and paint corrosion protection.
✓ Low Energy Consumption ✓ High Efficiency
Machine Introduction
Machine Overview 1
Machine Overview 2
Production Flow
Production Flow 1
Production Flow 2
Main Technical Parameters
(Taking a width of 2850mm and an operating speed of 1000m/min as an example)
Item Unit Description
Tissue Paper - High quality toilet paper, facial tissue paper, etc
Roll Weight g/m2 10 - 35
Crepe Ratio % 10 - 30
Roll Up Section Paper Width Measurement mm 2850
Working Speed m/min 1000
Design Speed m/min 1100
Dynamic Balance Vehicle Speed m/min 1200
Paper Roller Dynamic Balance Speed m/min 1300
Capacity t/d Calculated based on a fixed weight of 16 g/m2, wrinkling rate of 22%, vehicle speed of 900mpm, and 94% efficiency
Paper Machine Gauge mm 3800; Wire section 4000 Press and dryer section
Power kW ~449 (Tissue machine)
Drive Type - All digital AC variable frequency sectional drive
Paper Machine Arrangement Method - hand (looking from reel to headbox, drive side on right side), subject to machine drawing
Maximum Piece Weight t ~45t Steel Yankee dryer
Maximum Piece Size mm Φ3660x5480
Wire Outlet Dryness % ≥18~20
Drying Degree Before Entering the Dryer % ≥36
Drying Degree After Leaving the Dryer % ≥94
Paper Dryness % 94%
Average Shrinkage Rate % < 2
Return % ~8
Main Machine Configuration
Item Description
Model JLW
YANKEE DRYER Φ3660mm Steel Yankee Dryer
PRESS Suction Press
HOOD Steam-heated dual respiration hot-air hood
Capacity Specs
Item Grade 1 Grade 2 Grade 3 Grade 4 UNIT
Quantitative Winding Unit 13.5 14.5 16 20 g/m2
Crepe Ratio 20 20 22 25 %
Roll Up Moisture 5 5 5 5 %
Quantification of Drying Cylinder 10.8 11.6 12.48 15 g/m2
Clean Paper Width 2850 2850 2850 2850 mm
Yankee Cylinder Speed 1000 950 900 800 mpm
Daily Production 44.2 45.2 46 49.2 T/24H
Product Details
Product Details 1
Product Details 2
  • 1 Reciprocating Scraper: Ensures uniform creping of the paper and delivers a smoother surface finish.
  • 2 Headbox: The main support structure is made of SS304 stainless steel welded and tempered, and is a rigid frame structure as a whole. The porous and multi tube bundle stainless steel box is connected to the bottom structure by bolts. The dilution water mixing chamber will be independent of this structure. This design ensures that the nozzle will not deform under high pressure generated during high-speed production.
  • 3 Paper Winding Machine: Uniformly rolls paper into large-diameter jumbo rolls.
  • 4 Vacuum Roll: Efficiently dewaters the paper web, maintains sheet uniformity and surface quality, reduces roller marks, prevents fiber rewetting, and supports web transfer.
  • 5 Steel Yankee Dryer: Efficiently dries the paper web, controls surface finishing and creping, and supports/transfers the web.
  • 6 Turbo Blower: Provides vacuum to vacuum rolls and vacuum boxes.
  • 7 Low-Pulse Pulp Pump: Delivers pulp to the forming wire (stock approach system).
  • 8 Wire-Pre Pressure Screen: Precise screening of pulp prior to web forming.
  • 9 Hardened Gear Reducer: Transmits motor power through speed reduction.
Product Details 3
Company Strength
Company Strength 1
Company Strength 2
Company Strength 3
FAQ & Service
Q1: How to pack the products?

We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.

Q2: What is your payment terms?

TT and L/C are acceptable and TT will be more appreciated. 30% deposit in advance and balance before loading.

Q3: What is the delivery time?

It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.

Q4: How to keep your equipments from corrosion?

We use world-famous paint and follow a strict, standardized painting process for optimal protection.

Q5: How do you manufacture your equipment?

Our machining technology includes laser/plasma cutting, automatic welding, CNC cutting, and bending.

Q6: How to install after the equipments arriving destination?

We will provide detailed illustrations to you. If necessary, we will send technicians to assist with the installation.

Related Products